Propeel HS is a specially formulated white pigmented solvent borne temporary protective coating based on heat stabilised PVC. The product is designed for application to clean metal low-bake paint spray booth walls, where bake temperatures of up to 180°F (83°C) are encountered. Booth walls are maintained in as new condition providing the ideal light reflecting paint spraying environment. Propeel HS provides a dry plastic temporary coating that will facilitate capture/containment of even the heaviest paint overspray deposits that can then be quickly and easily removed by peeling off the coating for disposal during routine booth maintenance. Areas of heavy contamination can be cut out and touched in or the entire area re-coated as necessary. Propeel HS should be applied to clean bare metal (normally galvanised), unpainted substrates and removed, depending on the degree of overspray contamination, every 3 Р6 months prior to re-application. Note: When considering use on painted or plastic surfaces patch testing should be carried out due to the possibility of plasticiser migration coating life will be reduced if used under these circumstances. 2-pack fully cured paints can offer a greater degree of resistance to plasticiser migration. Features and benefits: Easy to use РSpray, brush or roller.Quick drying РBooth is ready for use in 30 Р40 minutes. Dense white film РExcellent background reflection. Good resistance to most commonly encountered paint overspray. Enables heavy overspray deposits to be removed quickly, easily and cleanly. Economical in use heavily contaminated areas may be cut out and re-coated. Excellent peelability. Economical in use РCoverage 2-3 m2 / ltr.