2,000+ site visits already completed in 2026

Find the maintenance issues costing you time, waste and rework

Book a free on-site maintenance diagnostic with ORAPI Maintenance. We walk the area with your team, review the real working conditions, and help identify practical ways to reduce downtime, waste, rework, incorrect product use or recurring maintenance issues.

Request a Technical Site Visit What Can We Help You Solve?

What happens during the diagnostic

1

Show us the issue Walk us through the line, process, workshop or application area.

2

We assess the real conditions We look at product use, process, surface, contamination, operator method and environment.

3

You get practical next steps Clear guidance on what to improve, test, change or avoid.

Is this diagnostic right for your site?

A technical site visit is most useful when there is a real process issue, recurring problem or improvement opportunity to investigate.

✓

You have a recurring maintenance problem

✓

You are losing time to cleaning, rework or stoppages

✓

You are unsure whether your current product is right

✓

A product is not performing as expected

✓

Operators are getting inconsistent results

✓

You want to reduce waste, downtime or unnecessary spend

What’s included in your free on-site maintenance diagnostic

A practical review of your site conditions, application process and maintenance challenge.

Site
walkthrough

We review the relevant line, workshop or maintenance area with your team.

Problem
assessment

We look at what is happening, where it happens and what may be contributing to it.

Application
review

We assess how products are being selected, applied, stored, used or removed.

Product suitability
check

We consider whether the current product is right for the job and being used correctly.

Improvement
opportunities

We identify ways to reduce time, waste, rework and unnecessary product use.

Clear next
steps

You get practical guidance on what to test, change, avoid or improve next.

Technical Knowledge you can put to work

Industrial experience 50+

Years supporting industrial maintenance

Site knowledge 10,000+

Site visits completed

Customer base 2,500+

Customers supported

Technical range 1,000+

Proven formulations

What can we help you solve?

You do not need a perfectly defined technical brief. Many customers request a visit because they know something is not working as well as it should, but they are not sure why.

Water treatment issues Foam, sludge, odour, paint kill or imbalance

Airborne dust settling Particles landing before coating, bonding or assembly

Floor-borne dust Dirt carried into clean or critical process areas

Tacky mat issues Dust still entering despite floor protection

Recurring contamination Dust, residue, oil, dirt or process transfer

TAKrag / Wipe problems Wrong wipe, lint, residue or poor pickup

Paint defects Particles, fish eyes, poor finish or trapped dirt

Overspray build-up Booth walls, floors, grilles or equipment fouling

Peelable coating failures Hard removal, poor coverage or surface damage

Cleaning takes too long Slow removal, repeat passes or excess labour

Residue left behind Films, smears, streaks or surface deposits

Drying delays Cleaning or solvent process slowing production

High product use Over-application, waste or unsuitable method

Recurring downtime The same task or fault keeps stopping work

Repeat rework Jobs need correcting, cleaning or repeating

Product not performing Find whether it is product, process or conditions

Lubricant not lasting Load, speed, heat, access or frequency mismatch

Over-lubrication Excess grease, mess, waste or contamination risk

Seized components Heat, corrosion, access or anti-seize selection

Corrosion returning Exposure, preparation or protection mismatch

Bonding failures Surface, cure, product or application issues

Threadlocker problems Poor cure, wrong strength or joint failure

Leaks returning Sealant choice, surface prep or application method

Operator variation Different results across shifts, users or sites

Repeat problems we solve

A few examples of recurring site issues where seeing the process first can make the next step much clearer.

BACTERIA
IN PAINT
BOOTH

Request Help

INCLUSIONS
IN PAINT

Request Help

RUST /
CORROSION

Request Help

DE-SEIZING
RUSTED
BOLTS

Request Help

Wall of trust

Feedback from ORAPI customers across the UK.

★★★★★ 4.9 average rating from 306 reviews

“ORAPI’s product recommendations have been practical for our environment, and our ongoing relationship with the Technical Sales Specialist gave us confidence to try the product. Based on the results, I would consider using ORAPI products elsewhere in the operation and would recommend their products to others in a similar role.”

“Personal service. Direct contact with the Sales Manager for the account. Access to ORAPI’s H&S lead is extremely useful and the support is thorough.”

“The people I deal with are excellent in all aspects of their job, especially the communication side of things. Arron and his team always keep me up to date with information about orders and deliveries. There is nothing worse than being left in the dark. Just keep doing what you’re doing because it is working.”

“Cleans very well. We previously had problems with grease build-up around the sides of the tank, however this doesn’t happen as much recently. Nothing can be improved at this point. All questions are answered, orders are processed and delivered accordingly. The experience has always been good.”

“We have been using this product ever since I started, which is over 15 years. Always reliable.”

“We were advised to use it from the start of the install by the Technical Sales Specialist and have had no problems. Happy with everything. No complaints.”

“The product is good, no complaints and I am happy to re-order when next needed. ORAPI are great to deal with and always go out of their way to help.”

“My purchasing team has a good relationship with Carl, our Technical Sales Specialist. He communicates well and provides a good service to meet our business needs.”